Menu [toggle]

History: Cleaningandlubing

Comparing version 2 with version 3


@@ -Lines: 8-14 changed to +Lines: 8-14 @@
Lay bike on its LEFT side (chain up)
- Using Tri-flow oil in a small drip bottle WITH THE STRAW ON THE SPOUT, put several drops of lubricant in the front hub bearings right side, headset top and bottom cups, left pedal, bottom bracket right side, front derailer pivots (8) and limit screws; rear derailer pivots(8), limit screws, barrel adjuster, springs and jockey pulley wheel axles; rear hub bearing right side, and freewheel bearings.
+ Using Tri-flow oil in a small drip bottle WITH THE STRAW ON THE SPOUT, put several drops of lubricant in the right side front hub bearings and a few on the axle nut or quick release (as in "generally..." below); also lube the headset top and bottom cups, left pedal, bottom bracket right side, front derailer pivots (8) and limit screws; rear derailer pivots(8), limit screws, barrel adjuster, both chain-tension springs and jockey pulley wheel axles; and the rear hub bearing right side, and freewheel bearings.
- Lay bike on RIGHT side and lubricate rear hub bearings left side, right pedal, bottom bracket left side, front hub left side.
+ Lay bike on RIGHT side and lubricate rear hub bearings left side, right pedal, bottom bracket left side, kickstand, and the front hub left side.

Stand the bike up and lube the front and rear brake pivots and barrel adjusters, shifters (if NOT mounted on the handlebars), the seat binder bolt.

History

Legend: v=view, c=compare, d=diff
Date UserIpComment Version Action
Mon 20 of May, 2013 20:07 UTC JSheehan108.84.195.73   3
Current
 v
Mon 20 of May, 2013 20:01 UTC JSheehan108.84.195.73   2  v  c  d  
Mon 20 of May, 2013 17:22 UTC JSheehan108.84.195.73   1  v  c  d